1-1
Chapter 1
General
About this Manual
This manual supplement is an addition to the Users
Manual that is included with the ScopeMeter 192/196/199
test tool kit.
It provides user information about the extended test tool
functionality that becomes available after installation of the
MS 190 software.
Safety Information
Read and comply with the safety instructions that you find
in the ScopeMeter 192/196/199 Users Manual that is
included in the test tool kit shipment.
The MA 190 kit accessories are intended for low voltage
(42 Vpk) use only, and do not comply with the voltage
rating on most other ScopeMeter accessories. Carefully
read the warning below which is an explicit addition to the
general accessory and ScopeMeter safety statements.
Warning
To avoid electrical shock or fire, do NOT
connect the following accessories to voltages
more than 42 Vpk (30 Vrms) or circuits of
more than 4800 VA :
•
CS 190-1R, 1 Ohm shunt resistor
•
TR 190-50R, 50 Ohm terminator
•
TA 190-50R, 50 Ohm terminator / 10:1
attenuator
Limited Warranty, Limitation of Liability
Read the Warranty and Limitation of Liability statements
that you find in the ScopeMeter 192/196/199 Users
Manual that is included in the test tool kit shipment. These
statements also apply to the MS190 and MA190 kits.
