Fluke OptiView DS3/E3, Руководство по началу работы

Страница: 48 / 60

OptiView
Getting Started Guide
44
Changing the Management Port Configuration
Previously, when you set up the analyzer (under “Setting Up the
Analyzer”), you statically assigned the
MANAGEMENT
port’s IP address
through the serial configuration port. If you want to change that
configuration now or use a DHCP-assigned IP address, complete the
following:
1. Click
Management Port
.
2. In the
TCP/IP Settings
section:
•
To use a DHCP-assigned address, check the
Use DHCP to acquire
settings
box.
OR
•
To use a static IP address, select or type IP address information
in the
Source
,
Mask
,
Router
,
Primary DNS
, or (optional)
Secondary DNS
fields.
3. Click to apply the changes.
This warning is displayed:
Connection to remote OptiView
analyzer may be lost. Proceed anyway?
4. Click .
If you lose the remote connection to the analyzer because you
changed the IP address, you can reconnect through the
OptiView
Browser
as described under “Starting the Remote User Interface”.