20
More NetTool Setup Options
Other setup options include:
Unwanted Protocols
IP Setup
Ping List Editor
Language
About NetTool
afq59s.bmp
⇒
Select
Unwanted Protocols to specify protocols
that NetTool will warn you are present on the
network. This helps in situations like a network-
wide migration away from certain protocols. If
NetTool sees them, it reports them in the Problem
Log.
⇒
Choose
IP Setup to configure your NetTool to
ping (check the
IP Setup section for details).
⇒
Access
the
Ping List Editor to view, edit, or add
to lists of preset IP addresses that you have
previously downloaded using NetTool Toolkit.
The editor enables you to add to an existing list or
edit an existing IP address within a list.
Select one of the lists by highlighting the list name
then pressing Select. Select Add New Device to
add an IP address to that list. To edit an existing
address, select it then change any of the octets
within the address.
⇒
Choose Language. Select a language from the
available choices.
⇒
View software and hardware details. Select
About NetTool to view the serial number, MAC
address, and revision information. Be sure to
record the serial number and MAC address of your
NetTool for future reference.
Содержание NetTool
Страница 2: ......
