Fluke IRR2-BT Скачать руководство пользователя страница 1

Страница: 1 / 16

IRR2-BT

Solar Irradiance Meter Pro

Users Manual

Introduction

The Fluke IRR2-BT Solar Irradiance Meter Pro (the Meter or

Product) provides digital measurements related to photovoltaic

(PV) panels.
The Meter measures and reads:



Solar irradiation (W/m

) on the surface of a photovoltaic (PV)

panel



Temperature (°F or °C) on the surface of a photovoltaic (PV)
panel



Inclination (degrees) of a photovoltaic (PV) panel



Cardinal degrees with the compass function

The Meter can wirelessly transfer measurements to the

SMFT-1000 PV Analyzer (the Analyzer). This data is used for

IV curve performance analysis of the solar panel and other

measurements of the roof slope and the compass.

Note

The Meter does not connect to smart phones and other
smart devices.

When the date and time on the Meter and the Analyzer match and

the Meter is out of wireless connection range with the Analyzer,

the Meter automatically records the data to memory. This data

can be transferred later to the SMFT-1000.

Contact Fluke

Fluke Corporation operates worldwide. For local contact

information, go to our website:

www.fluke.com

To register your product, or to view, print, or download the latest

manual or manual supplement, go to our website.

+1-425-446-5500

[email protected]

Fluke Corporation

P.O. Box 9090

Everett WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

PN 5339484 (English) 8/2022

Specifications are subject to change without notice. All Product

names are trademarks of their respective companies.

Eng

lish

Содержание IRR2-BT

















Результаты поиска

Содержание IRR2-BT

Отзывы:

Бренды по названию

Популярные бренды

Fluke IRR2-BT, Руководство пользователя

Результаты поиска

Содержание IRR2-BT

Отзывы:

Бренды по названию

Популярные бренды