Fluke i50s, Руководство пользователя

Страница: 5 / 24

1
i50s Current Probe/
PSi50s Power Supply
Introduction
XW
Warning
To avoid electrical shock or possible injury, do not use the
i50s Current Probe with oscilloscopes with floating inputs,
i.e. oscilloscopes not referenced to ground.
The i50s Current Probe (“the Probe”) has been designed for use with
oscilloscopes for accurate, non-intrusive measurement of ac, dc and complex
waveform currents. Using advanced Hall Effect technology the Probe can
accurately measure currents over the frequency range of dc to 50 MHz with a
measuring range up to 50 A peak. The Probe is a general purpose, universal
current Probe which can be used with any oscilloscope.
XW
Warning
To avoid electrical shock or possible injury, use the PSi50s
Power Supply only with i50s Current Probes.
The PSi50s Power Supply (the “Power Supply”) is an external power supply
that can simultaneously power two i50s Current Probes. The Power Supply is
supplied from single-phase mains 115 or 230 V ac, with frequencies from 44
to 60 Hz, and provides a symmetrical dc voltage of
±
12 V.