Fluke Hart Scientific 1522 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 60

background image

The labels can be pre-loaded using the Windows® HyperTerminal or other se-
rial communications program and the command LBnn[=nnnnnnnn] as de-
scribed in Section 8.2.1. The labels can also be pre-loaded using the serial port
or the 2374 IR dongle with the 9934 Log

Ware

or 9935 Log

Ware

II software

available by calling an Authorized Service Center (see Section 1.3 on page 4).

7.3.2

Dump Data?

Press the

CLR

button anytime while in Demand Log Mode to enter this func-

tion. This function allows the user to download the stored values using the se-
rial port or print the data to a serial printer. To download using the serial port,
the 1522 must be connected to a computer using the serial cable sent with the
instrument at the time of purchase. Windows

®

HyperTerminal or other serial

communications program must be running. Set HyperTerminal or other serial
communications program to use the correct COM port and to operate at 2400
baud, 8 data bits, 1 stop bit, no parity, and no flow control. Once the communi-
cations program is running and configured correctly, press the

CLR

button on

the 1522 until the second line of the display reads, “Dump Data? No”. Select
“Yes” using the

Up

or the

Down

buttons and then press the

ENT

button. The

demand logged data begins displaying in the terminal window and the second
line displays “Downloading data”.

The instrument advances to the next function when all values have been down-
loaded. Pressing the

CLR

button before or during downloading causes the

download to stop and advances to the next function. To exit the Demand Log
Mode, press the

MODE

button.

The demand logged data can also be downloaded using the 2374 IR dongle
with the 9934 Log

Ware

or 9935 Log

Ware

II software. The user must purchase

the IR dongle and the software from Hart Scientific. Using this software, the
demand data can be downloaded into a file in ASCII format.

The Log

Ware

software also provides a utility to view and change logging

labels.

7.3.3

Clear Log?

This function clears the on-demand memory. After 100 readings have been
stored in the on-demand memory the 1522 does not allow any more readings to
be logged until the on-demand memory is cleared. Press the

Up

and

Down

un-

til "Yes" appears and then press the

ENT

button to clear the on-demand mem-

ory. Pressing the

CLR

button at anytime advances to the next function without

clearing the memory.

7.4

Auto Logging

This mode allows data logging to occur automatically at user selected intervals.
Up to 10,000 temperature readings can be stored into memory with units, time,
date, and label. Multiple log sessions are appended to the memory until the
memory is full. The log sessions are grouped by the pre-loaded labels.

1522 Handheld Thermometer Readout

User’s Guide

34

«
...
33
34
35
36
37
...
»

Содержание Hart Scientific 1522





























































Отзывы:

Нет отзывов

Похожие инструкции для Hart Scientific 1522

Бренд: Danfoss Страницы: 28

Бренд: Cadet Страницы: 4

Бренд: YONGKANG Страницы: 21

Бренд: Saswell Страницы: 5

Бренд: Ebro Страницы: 18

Бренд: Omega Страницы: 12

Бренд: Tegam Страницы: 6

modletBN WiFi TE5010

Бренд: ThinkEco Страницы: 16

Бренд: JUMO Страницы: 2

Evolution Control SYSTXBBUID01

Бренд: Bryant Страницы: 12

Бренд: Giacomini Страницы: 10

Бренд: Watlow Electric Страницы: 6

Бренд: Ada Страницы: 3

Бренд: Honeywell Страницы: 8

Бренд: Regulus Страницы: 4

Бренд: Fluke Страницы: 2

Бренд: Silvercrest Страницы: 38

Бренд: Silvercrest Страницы: 94

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды