Fluke FIBER QUICKMAP, Руководство по началу работы

Страница: 7 / 13

5
Settings

R : Shows the reflectance of an incident on the fiber. The
measurement is in decibels.


MORE

: Shows when the troubleshooter found more
than one incident. Press
 
to see the reflectance of
the incidents. The numbers show the number of the
incident and the total number of incidents.

Shows an error number for error conditions.

Shows as the troubleshooter does a test.

Shows when the troubleshooter shows the distance to a
break or the end of the fiber.
 
: Shows when the length is more than the range of the
troubleshooter.

Settings for the troubleshooter.
Settings
To change the settings on the troubleshooter:
1
Press

.
2
To select a setting to change, press

, then press

.
3
Use
 
to change the setting. See below for
information on the settings.
4
Press

or

to save the setting.

BACKLIGHT: Timer for the display backlight.

I.O.R. : Index of refraction.

ft/m: Unit for length measurements.

LOSS LIMIT: Sets the minimum value of power loss for
incidents that the troubleshooter shows as an incident. You
can select a value from 0.50 dB (lower loss) to 6.10 dB
(higher loss) in 0.2 dB increments. The default is 0.70 dB.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com