Fluke FIBER QUICKMAP, Руководство по началу работы

Страница: 10 / 13

8
FIBER Q
UICK
M
AP
Getting Started Guide
How to Use the Troubleshooter
Notes
Always use test cords that comply with GR-326-CORE
specifications and have UPC connectors. Other cords
can cause unreliable measurements.
Fluke Networks recommends that you use launch and
receive fibers. See the Users Manual.
1
Clean all fiber connectors.
2
Connect the fiber to the troubleshooter (Figure 5).
3
Turn on the troubleshooter, then press

. Pages 10 and 11
show examples of measurement results.
Note
If there is a break in the fiber, the troubleshooter does
not show incidents after the break.
If the reflectance or loss of a connection is higher than the limit:

A connector endface is dirty or damaged.

A connector is loose.

The cable is damaged within about 3 m of the connector.

The connection is between fibers of different types.

The fiber has a bad splice or a sharp bend.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com