4
Test and Certify a Channel
Notes
You must select a test limit and outlet configuration that
support tests on two-pair cable for the DSX-CHA021 adapters, or
four-pair cable for the DSX-CHA-M12-X adapters.
The IEEE 802.3 standards support only the channel link
configuration.
1
On the home screen, tap the test setup panel.
2
On the
CHANGE TEST
screen, tap
NEW TEST
.
3
On the
TEST SETUP
screen, tap the panels to select settings:
•
Cable Type
: If the correct type is not in the
LAST USED
list, tap
MORE
, tap
Manufacturers
, tap the correct manufacturer, then tap
a cable type.
•
Shield Test
: Shows only for shielded cable types. To get a
FAIL
result if the shield is open, select
On
. See the
Versiv Series Users
Manual
for more information.
•
Test Limit
: If the correct limit is not in the
LAST USED
list, tap
MORE
, then tap a group.
•
Outlet Configuration
: Select the correct configuration for the
connectors’ wire map.
4
On the
TEST SETUP
screen, tap
SAVE
when your test setup is
completed.
5
Connect the testers to the link, as shown in Figure 2, 3, or 4.
6
Tap
TEST
on the main tester or press
B
on the main or remote
tester.