Fluke CNX a3000, Руководство по калибровке

Страница: 12 / 24

CNX a3000
Calibration Manual
4
Symbols
The symbols in Table 1 are used on the Product or in this manual.
Table 1. Symbols
Symbol Meaning

Risk of Danger. Important information. See Manual.

Hazardous voltage

Double insulation

Battery
CAT II
Measurement Category II is applicable to test and measuring circuits connected directly to
utilization points (socket outlets and similar points) of the low-voltage MAINS installation.
CAT III
Measurement Category III is applicable to test and measuring circuits connected to the
distribution part of the building’s low-voltage MAINS installation.
CAT IV
Measurement Category IV is applicable to test and measuring circuits connected at the
source of the building’s low-voltage MAINS installation.

Conforms to European Union directives.

Conforms to relevant North American Safety Standards.

Conforms to relevant Australian EMC requirements.

This product complies with the WEEE Directive (2002/96/EC) marking requirements. The
affixed label indicates that you must not discard this electrical/electronic product in
domestic household waste. Product Category: With reference to the equipment types in the
WEEE Directive Annex I, this product is classed as category 9 "Monitoring and Control
Instrumentation” product. Do not dispose of this product as unsorted municipal waste. Go
to Fluke’s website for recycling information.
riešenia na presné meranie
http://www.elso.sk