Fluke 718 Series, Руководство пользователя

Страница: 12 / 36

718 Series
Users Manual
4
Table 2. Safety Information (cont.)
XW
Warning
•
To avoid false readings, which could lead to possible electric shock or personal injury, replace the
battery as soon as the battery indicator
B
appears.
•
To avoid a violent release of pressure in a pressurized system, shut off the valve and slowly bleed off
the pressure before you attach or detach the internal pressure sensor or pressure module fitting to the
pressure line.
•
To avoid over pressure damages, do not apply pressure that exceeds the limits listed in the Pressure
Specifications table in the “Specifications” section.
•
To avoid mechanically damaging the Calibrator, do not apply torque between the pressure fitting and
the Calibrator case. See Figure 1 for the proper use of tools.
•
To avoid misleading readings, disconnect the pressure module connector at the Calibrator.
•
To avoid damage to the pressure module, refer to the related Instruction Sheet.
•
To avoid damage to the pump, use with dry air and non-corrosive gases only. Check test leads for
continuity before using. Inspect Calibrator for cracks or damage, do not use the probes if they are
damaged or show high resistance.