Fluke 64 max Скачать руководство пользователя страница 2

Страница: 2 / 35

LIMITED WARRANTY AND LIMITATION OF LIABILITY

This Fluke product will be free from defects in material and workmanship for three

years from the date of purchase. This warranty does not cover fuses, disposable

batteries, or damage from accident, neglect, misuse, alteration, contamination, or

abnormal conditions of operation or handling. Resellers are not authorized to

extend any other warranty on Fluke’s behalf. To obtain service during the warranty

period, contact your nearest Fluke authorized service center to obtain return

authorization information, then send the product to that Service Center with a

description of the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH

AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED.

FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR

THEORY. Since some states or countries do not allow the exclusion or limitation of

an implied warranty or of incidental or consequential damages, this limitation of

liability may not apply to you.

11/99

1.888.610.7664

[email protected]

Fluke

Direct

.com

Содержание 64 max




































Результаты поиска

Содержание 64 max

Отзывы:

Похожие инструкции для 64 max

Бренды по названию

Популярные бренды

Fluke 64 max, Руководство пользователя

Результаты поиска

Содержание 64 max

Отзывы:

Похожие инструкции для 64 max

Бренды по названию

Популярные бренды