Infrared
Thermometer
Display
9
3. Push
the
Enter
softkey to choose the necessary material.
To manually type the typical emissivity of a material:
1. Push
the
No.
softkey.
2.
Use the down or up arrow softkey to change the entry. Hold
down the arrow softkeys to increase the rate of change.
3. Push
the
Done
softkey to return to the main menu.
°
C and
°
F
To toggle between
°
C and
°
F measurements, push the
Menu
softkey until
°
C
or
°
F
shows
as the left softkey, and then push the
necessary softkey.
Min, Max, Avg, Differential
The Product can measure minimum (MIN), maximum (MAX),
average (AVG), or differential (
∆
) temperatures. The Product does
not show these values if a thermocouple is connected to it.
To turn on the Min/Max and Avg/Diff modes:
1. Push
the
Menu
softkey until
MnMx
shows as the left softkey
and
Avg
shows as the right softkey.
2. Push
the
MnMx
softkey and the
Avg
softkey.
Alarm
The Product has a programmable high and low temperature alarm
to assign high or low readings. When the alarm level is reached, an
alarm sounds and the display flashes orange and white.
