Fluke 562, Руководство пользователя

Страница: 15 / 36

Infrared Thermometers
Menu Overview
11
To access the Emissivity menu:
1. Push
the Menu softkey until

shows as the right softkey.
2. Push the

softkey.
To access the Emissivity list:
1. Push
the Table softkey. The display shows a list of
materials and their suggested emissivity.
2. Use the down arrow to navigate through the list.
3. Push the Enter softkey to choose the necessary material.
To manually type the typical emissivity of a material:
1. Push
the No. softkey.
2. Use the down or up arrow softkey to change the entry.
Hold down the arrow softkeys to increase the rate of
change.
3. Push the Done softkey to return to the main menu.
°
C and
°
F
To toggle between
°
C and
°
F measurements, push the Menu
softkey until
°
C or
°
F shows as the left softkey, and then push
the necessary softkey.
Min, Max, Avg, Differential
The Product can measure minimum (MIN), maximum (MAX),
average (AVG), or differential (
Δ
) temperatures each time a
reading is taken. These values are not shown if a thermocouple
is plugged into the Product.
To turn on the Min Max mode:
1. Push
the Menu softkey until MnMx (Min Max) shows as
the left softkey function.
2. Push the MnMx softkey.