3210-PR-TF English Instruction Sheet
Page
2
Symbols
The table below lists the symbols used on the Probe and/or in this
instruction sheet.
Symbol Description
Do not dispose of this product as unsorted municipal
waste. Go to Fluke’s website for recycling information.
Important Information. See manual.
Hazardous Voltage. Risk of electric shock.
Double insulation.
Do not apply to or remove from hazardous, live
conductors, without using personal protective
equipment.
Canadian Standards Association- Complies with
relevant North American Safety Standards.
Complies with the relevant European standards.
Conforms to relevant Australian standards.
CAT III
Equipment is designed to protect against transients in
equipment in fixed equipment installations, such as
distribution panels, feeders and short branch circuits,
and lighting systems in large buildings.
CAT IV
Equipment is designed to protect against transients
from the primary supply level, such as an electricity
meter or an overhead or underground utility service.
Safety Instructions
Please read this section carefully. It will familiarize you with the most
important safety instructions for handling the Probe. In this instruction
sheet, a
Warning
identifies conditions and actions that pose hazard(s) to
the user. A
Caution
identifies conditions and actions that may damage
the Probe or the test equipment.
Warning
To prevent possible electrical shock, fire, or personal injury:
•
The Probe is to only be used and handled by qualified
personnel.
•
Always connect to display device before it is installed
around the conductor.
•
Use the Product only as specified, or the protection
supplied by the Product can be compromised.
•
High voltages and currents can be in adjacent circuits
under test.
•
Before each use, examine the Product. Look for cracks or
missing pieces of the clamp housing or output cable
insulation. Also look for loose or weakened components.
Carefully examine the insulation around the jaws.
•
Do not use if the output cable wear indicator shows
(contrasting color inner insulation).
•
Do not use and disable the Product if it is damaged.
1.800.561.8187
Fluke-Direct
.ca
