Power Quality Logger
Using the 1745 Power Quality Logger
25
2.
Remove the test leads of the three phases. Be sure to remove the
measuring cable of the neutral wire last.
3.
Remove the current probes.
Evaluating the Logged Data
You’ll use PQ Log to evaluate the logged data. Data can be read out during
logging as well as at the end.
1.
Connect the Logger to line power.
2.
Connect the RS232 interface cable to your PC’s serial port, then to the
Logger.
3.
Start the PQ Log software.
4.
Use PQ Log to transfer the data from the Logger to the PC.
5.
Once the data is transferred, remove the RS232 interface cable and
operating power from the Logger.
6.
Evaluate the data using PQ Log.
For details, refer to the PQ Log manual.
Methods of Logging
The following section describes methods of logging using the 1745 Logger.
Содержание 1745
Страница 12: ...1745 Users Manual iv ...
Страница 14: ...1745 Users Manual vi ...
Страница 72: ...1745 Users Manual 58 ...