110 PLUS and 115
Users Manual
2
Safety Information
A
Warning
identifies conditions and procedures that are dangerous to the user. A
Caution
identifies conditions and procedures that can
cause damage to the Product or the equipment under test.
XW
Warning
To prevent possible electrical shock, fire, or personal injury:
•
Read all safety information before you use the Product.
•
Carefully read all instructions.
•
Do not use the Product around explosive gas, vapor, or in damp or wet environments.
•
Comply with local and national safety codes. Use personal protective equipment (approved rubber gloves,
face protection, and flame-resistant clothes) to prevent shock and arc blast injury where hazardous live
conductors are exposed.
•
Examine the case before you use the Product. Look for cracks or missing plastic. Carefully look at the
insulation around the terminals.
•
Do not use test leads if they are damaged. Examine the test leads for damaged insulation and measure a
known voltage.
•
Limit operation to the specified measurement category, voltage, or amperage ratings.
•
Use the correct terminals, function, and range for measurements.
•
Do not touch voltages > 30 V ac rms, 42 V ac peak, or 60 V dc.
•
Do not exceed the Measurement Category (CAT) rating of the lowest rated individual component of a
Product, probe, or accessory.
•
Use Product-approved measurement category (CAT), voltage, and amperage rated accessories (probes,
test leads, and adapters) for all measurements.
