background image

 

 

Warranty and Product Support 

Fluke Biomedical warrants this instrument against defects in materials and workmanship for one year from 

the date of original purchase OR two years if at the end of your first year you send the instrument to a Fluke 

Biomedical service center for calibration.  You will be charged our customary fee for such calibration. During 

the warranty period, we will repair or at our option replace, at no charge, a product that proves to be 

defective, provided you return the product, shipping prepaid, to Fluke Biomedical. This warranty covers the 

original purchaser only and is not transferable.  The warranty does not apply if the product has been 

damaged by accident or misuse or has been serviced or modified by anyone other than an authorized Fluke 

Biomedical service facility. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR 

PURPOSE, ARE EXPRESSED OR IMPLIED.  FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, 

INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, 

ARISING FROM ANY CAUSE OR THEORY.  

This warranty covers only serialized products and their accessory items that bear a distinct serial number 

tag. Recalibration of instruments is not covered under the warranty. 

This warranty gives you specific legal rights and you may also have other rights that vary in different 

jurisdictions. Since some jurisdictions do not allow the exclusion or limitation of an implied warranty or of 

incidental or consequential damages, this limitation of liability may not apply to you.  If any provision of this 

warranty is held invalid or unenforceable by a court or other decision-maker of competent jurisdiction, such 

holding will not affect the validity or enforceability of any other provision. 

7/07 

 

Содержание 05-443





























Отзывы: