Fluke 05-443, Руководство пользователя

Страница: 11 / 28

Digital Wall Mount-Area Monitor
Safety Information
3
•
Replace the mains power cord if the insulation is damaged
or if the insulation shows signs of wear.
•
Make sure the ground conductor in the mains power cord is
connected to a protective earth ground. Disruption of the
protective earth could put voltage on the chassis that could
cause death.
•
Do not put the Product where access to the mains power
cord is blocked.
•
Do not operate the Product with covers removed or the
case open. Hazardous voltage exposure is possible.
•
Batteries contain hazardous chemicals that can cause
burns or explode. If exposure to chemicals occurs, clean
with water and get medical aid.
•
Have an approved technician repair the Product.
•
Use only specified replacement parts.
•
Do not use the Product if it is damaged.
•
Disable the Product if it is damaged.
•
Use only specified replacement fuses.
•
For continued protection against the risk of fire, replace
only with fuse of the specified type and current rating.
•
The operator or responsible body is cautioned that the
protection provided by the equipment may be impaired if
the equipment is used in a manner not specified by Fluke
Biomedical
•
Only certified technician or calibration personnel should
replace battery.
•
Do not touch the circuit board in the calibration window due
to potential for electric shock.
•
Do not touch the center pin of the detector connector
unless the unit has been turned off and power has been
removed or at least 1 minute.
•
To prevent contact with internal hazardous live parts that
are accessible using a tool: turn off the Product and
disconnect the power cord. Allow the Product to sit for
1 minute before accessing internal components.