Y9600
Instructions
4
Unthreaded Rack Holes use
#10-24 U-Nuts and
#10-24 x 1/2 inchTruss-Head Screws
#8 Flat Washers, Lock Washers,
and #8-32 Hex Nuts
Front Slide Brackets
Threaded Rack Holes use
#10-32 x 1/2 inch Truss-Head Screws
#8-32 x 1/2 inch Pan-Head (4 Places)
Detail A
Detail B
Rear Slide Brackets
Ict003.eps
Figure 3. Install Slides into the Equipment Rack
Contact Fluke Calibration
To contact Fluke Calibration, call one of the following
telephone numbers:
Technical Support USA: 1-877-355-3225
Calibration/Repair USA: 1-877-355-3225
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31-40-2675-200
Japan: +81-3-6714-3114
Singapore: +65-6799-5566
China: +86-400-810-3435
Brazil: +55-11-3759-7600
Anywhere in the world: +1-425-446-6110
To see product information and download the latest
manual supplements, visit Fluke Calibration’s website
at
www.flukecal.com
.
To register your product, visit
http://flukecal.com/register-product
