Y9600
Instructions
2
Ict001.eps
Figure 1. Attach the Hardware to the Product
Install Rack Slides
1. Install the front slide brackets (shorter pair) to the
rack mounting rails. See Figure 3. If your rack has
threaded mounting rails, use two #10-32 x 1/2-
inch truss-head screws. See Figure 3, Detail A. If
your rack has unthreaded mounting rails, use two
#10-24 x 1/2-inch truss-head screws and two #10-
24 U-nuts. See Figure 3, Detail B.
2. Install the rear slide brackets (longer pair) to the
equipment rack mounting brackets as described
in step 1.
3. Attach the slides to the front brackets with two #8-
32 x 1/2-inch pan-head screws, two #8 flat
washers, two #8 lock washers and two #8 hex
nuts. See Figure 3. Align the access hole in the
slide by moving the slide in and out as necessary
to access the screw heads.
4. Fully extend the slides to access the screw heads
and attach the slides to the rear brackets as
described in step 3.
