Page - 30
5.2.2
L-SWITCH™ Back
Here are pictures of the back of an L-SWITCH™.
At the bottom of the device we can see the white RJ45
port to connect electrically the L-SWITCH™ to the
SWITCHBOARD. Two light indicators are associated
with the RJ45 port.
The
orange indicator
lights up when the L-
SWITCH™ is powered.
The
green indicator
lights up if a “Check
connection” identification has been requested for
the L-SWITCH™ from the SWITCHBOARD (cf. §6.2)
or from the ESS™ Control software (cf. ESS™
Control User Manual).
5.2.3
L-SWITCH™ Bottom face
Here is a picture of the bottom face of an L-SWITCH™.
A pad covers the bottom face to ensure a good
gripping of the L-SWITCH™ to the surface where it
is placed in vertical position.
A
UNC ¼-20’’ thread is inserted
in the centre of
the bottom face so that the L-SWITCH™ can be
fastened to any ¼-20’’ screw-mounted device (as
further explained in §5.4).
5.2.4
L-SWITCH™ Side face
Here is a picture of the side face of an L-SWITCH™.
Several pads are integrated on each side of the L-
SWITCH™ to ensure a good gripping to the surface
where it is placed in horizontal position.
Pad
¼’’-
20 insert
Pad
Orange indicator
(Power OK)
green indicator
(Power OK + Check connection)
