Page - 21
4.2.2
M-SWITCH™ Back
Here are pictures of the back of an M-SWITCH™.
At the bottom of the device we can see the RJ45 port
to connect electrically the M-SWITCH™ to the
SWITCHBOARD. Two light indicators are associated
with the RJ45 port.
The
orange indicator
lights up when the M-
SWITCH™ is powered.
The
green indicator
lights up if a “Check
connection” identification has been requested for
the M-SWITCH™ from the SWITCHBOARD (cf.
§6.2) or from the ESS™ Control software (cf. ESS™
Control User Manual).
4.2.3
M-SWITCH™ Bottom face
Here is a picture of the bottom face of an M-SWITCH™.
A pad covers the bottom face to ensure a good
gripping of the M-SWITCH™ to the surface where
it is placed in vertical position.
A
UNC ¼-20’’ thread is inserted
in the centre of
the bottom face so that the M-SWITCH™ can be
fastened to any ¼-20’’ screw-mounted device (as
further explained in §4.4).
4.2.4
M-SWITCH™ Side face
Here is a picture of the side face of an M-SWITCH™.
Several pads are integrated on each side of the M-
SWITCH™ to ensure a good gripping to the surface
where it is placed in horizontal position.
Orange indicator
(Power OK)
green indicator
(Power OK + Check connection)
