Fluidwell F093, Руководство пользователя

Страница: 16 / 56

Page 16
FW-F093-P-M_v0404_01_EN.docx
3.3.5 EXPLANATION OF SETUP-MENU 4 - DISPLAY
SETUP FUNCTIONS AND VARIABLES
4 DISPLAY
4.1 FUNCTION
The large 17mm digits can be set to display running hours or engine
speed (RPM).
When "running hours" is selected, both running hours and engine
speed are displayed simultaneously.
When "engine speed" is selected, only engine speed will be displayed
with its measuring unit while running hours will be displayed after
pressing SELECT. The following can be selected:
HOURS - RPM
4.2 DISPLAY
This function determines what is shown on the display. With “ALL” it
will show both the
RPM and HOURS, at “TOGGLE” it will
automatically swap every 3 seconds between RPM and HOURS and
with “HAND” you can manually set the display you prefer. The
following can be selected:
ALL
– TOGGLE – HAND
4.3 CLR HRS
This function, Clear Hours, determines if the running hours can be
reset to zero at Operator level (by clicking CLEAR twice) or only at
SETUP-level, (SETUP 1.1
– CLEAR). The following can be selected:
DISABLE - ENABLE
4.4 ALARM SET
This function determines if the RPM alarm values can be set at both
Operator level and SETUP-level or at SETUP-level only.
If SETUP has been selected, the alarm values are still visible for the
Operator but cannot be changed. The following can be selected:
OPERATE - SETUP
4.5 ACC HRS
This function determines if the ACCumulated running HouRS are
displayed on the display after pressing “SELECT” twice or not.
DISPLAY - HIDE
The functions below will only effect the optional LED-backlight.
4.6 BACKLIGHT (optional)
If a LED backlight has been supplied, it can be turned on or off.
4.7 BL ALARM (optional)
In case the F093-P generates any alarm, the backlight can be set to
change to red. Following selections are available:
OFF: during alarm the color is according to setting 4.6.
ON: during alarm the color is red.
FLASH: during alarm the color flashes red and the color as per
setting 4.6.
4.8 BRIGHTNS (optional)
The brightness of the backlight can be set in following range:
1 - 5
One is minimum and five is maximum brightness