26
4. Set the IP address to 1.a.b.c (where a, b and c is the serial number of the
Fluidmesh unit), Netmask to 255.0.0.0 and Default Gateway to 1.0.0.1.
5.
Click
OK
, then
OK
again.
Have you disables the “Access the Internet using a proxy server” function?
To disable the
Access the Internet using a proxy server
function, go to
Control
Panel > Internet Options > Connections > LAN
Settings
and uncheck the
enable box.
7.2 I am unable to login into the web-based interface
If you are unable to login into the web-based interface, check your user name and
password settings.
The user name is not modifiable by the user and it is always the following:
admin
The password is modifiable; make sure you are using the right password. The default
password is the following:
admin
In case you forgot the password check the appropriate section in this troubleshooting
chapter in order to fix the problem.
7.3 I forgot the administrator password
In case you forgot the password and you need to access the web-based interface,
you must physically access the unit, open the enclosure in a weather-safe situation
and reset the factory default settings. Follow the instructions in the “Reset Factory
Default Settings” Section in the “Hardware Set-up” Chapter of this manual.
