Fluidmaster soft spa 9500, Руководство по установке

Страница: 17 / 32

17
Step 6:
Finishing Touches
A.
Using a wrench, tighten all metal-to-metal connections ½ turn
past hand tight.
Overtightening and/or the use of tools could cause damage and
lead to failure of the nut and/or fill valve. Such damage may not
be visible to the eye. Failure of the nut and/or fill valve can lead
to significant water leakage and water damage.
B.
Slowly turn the water supply on and check for leaks at the valve.
C.
Once all supply lines are securely
installed,
remove the tape from
the wand cover , and plug in your
bidet. Check that the light on the
left side of bidet base marked
“AUTO/STOP” comes on.
See page 23 for plug description
and specifications.
Metal-to-
Metal
Metal-to-
Metal
Tape
Auto/Stop
Touch a paper towel to water
connection points to check for
slow, unassuming leaks.
DO NOT OVERTIGHTEN. DO NOT USE TOOLS ON
PLASTIC NUT OR PLASTIC FILL VALVE.
NOTICE