8
9
STEP 6:
INSTALL NEW FILL VALVE
E:
INSTALL LOCKNUT
Screw locknut onto fill valve shank (below tank).
*Hand-tighten only. DO NOT OVERTIGHTEN.
B:
ATTACH REFILL CLIP TO OTHER END
OF REFILL TUBE
C:
INSERT FILL VALVE
Position refill tube to face flush valve making sure fill
valve parts
do not interfere with lever arm.
D:
ATTACH REFILL CLIP TO OVERFLOW PIPE
Note: If refill tube is too long to fit inside tank
with lid closed, remove refill tube from fill valve
refill port, cut tube, and reattach to port.
Scissors
(Optional)
STEP 7:
FINISHING STEPS
A:
ATTACH WATER SUPPLY
CONNECTOR TO FILL VALVE
Twist to the
right
*Hand-tighten only.
DO NOT OVERTIGHTEN.
C:
WATER LEVEL
After the tank stops filling, water level should fill the tank to
roughly ½ inch below top of overflow pipe to ensure a
proper flush. (Does not need to be exact.)
B:
TURN ON WATER
Check for leaks.
Overtightening may damage fill valve or coupling nut, potentially causing flooding. Make sure
the float cup does not touch the tank walls or tank lever and flush valve.
**
The top of the overflow pipe
must be
a minimum of 1"
below
tank lever hole.
*
A:
PUSH REFILL TUBE ONTO REFILL
PORT FIRST
Refill Clip
Refill Tube
TOP
DOWN
VIEW
Refill Tube
Lever Arm
Overflow
Pipe
Fill Valve
1/2"
Overflow Pipe
Top of
Overflow Pipe
Water Level
**Lever Hole
