Fluid BID1000W, Инструкция по эксплуатации, Страница: 7 / 20

960W
1400W(120V)
Rear cleaning / Massage cleaning, Front cleaning / Massage cleaning
110-120V
，
50/60Hz
Rated voltage
Rated power
Water pressure
range
The minimum necessary pressure 0.08MPa (hydrostatic pressure),
the maximum water pressure 0.8MPa (hydrostatic pressure)
6-level water temperature adjustment
Power Cord Length is about 1.2m
Heating power
Water
temperature
Water volume 5-level adjustment
Cleaning mode
Main Unit
Technical Specification
50W
Anti-syphon device, Anti-backflow device, Filter device
The water temperature sensor, Anti-burning apparatus, Thermostat,
Temperature fuse, Ground fault protection, Leakage protection ,
Anti-freeze cracking device
Nozzle position
Water pressure
protector
Anti-fouling
device
Safety device
Pressure stabilizer, Automatic pressure discharging device
Cleaning
device
200W
High temperature preventer, thermal fuse
(If Applicable)
6-level adjustment
Over 0.2m³/min Warm wind speed
Warm wind
temperature
Heating power
Safety device
Drying
device
None Photocatalyst
6- level adjustment
Deodorization
Method
Deodorization
Surface
temperature
Heating power
Soft close
The buzzer is off at night to avoid buzzer noise to guarantee a quiet
environment at night
Sterilization device
Plasma sterilization device
Noise-free setting
Heated seat
Open and close
device
Prevent low
temperature burn
Safety device
Caring
device
Smart, Always on, Always off
Night light
assembly
After 10 minutes of use, the seat temperature will automatically drop
slowly to a low level
Seat sensor,Temperature senor,Bimetal thermostat,Thermal fuse
Antibacterial position
Seat, Nozzle
To avoid disturbance from remote controls by multi-user User ID setting
(If Applicable)
5-level adjustment