6
●Put one strap over each shoulder and connect to the D-RING of the crotch strap.
●Adjust shoulder & crotch straps to be snug and secure.
●Fasten lap belt and tighten securely.
WARNING
Never ride without securing passengers in the Five point
Harness. Unrestrained passengers can affect bike handling; and they may be
more likely to be injured in the event of an accident.
NEVER LEAVE THE HARNESS BUCKLED WHEN NOT FITTED TO A
CHILD IN THE STROLLER, THE HARNESS CAN FORM LOOPS WHICH
MAY POSE A STARNGULAGTION HAZARD.
ATTACHING TRAILER TO BICYCLE
1) Pull the trailer hitch out of the drawbar and fit it onto the bicycle rear axle
：
a. On axles with quick release, take out the whole axle, push the trailer hitch
onto the nut and fit the axle back in.
b. On axles fastened with hexagonal nuts, unscrew the nut with washer. Push
the trailer hitch onto the axle and screw the nut back on with the washer.
2) Connect the hitch on the drawbar and secure the lock pin.
3) Once the drawbar is attached, pull safety belt through the rear end chain stay on the
bicycle and hook it into the bracket on the drawbar, ensure there is no slack that
could become tangled in any moving parts.
WARNING
If the hitch interferes with your bike or other bike attachments, or
if it does not tighten securely, do not use. Contact your bike retailer for help with
proper installation.
ATTACH THE HANDLEBAR
1) Attach the two handlebar mounting tubes to the frame on the rear panel.
2) With the open end of the mounting tube facing up, align the holes on the tube to
the holes on the frame.
3) Insert screws through the tube and holes in the frame and attach the nuts from the
inside of the cabin.
4) Tighten firmly using a screwdriver and wrench.
