4
Installing wheels
Place the wheel hub on the axle by simply pushing in the wheel until it snaps in
place, so the wheel cannot be removed. To remove the wheels, lift back of trailer up
and simply push on the push buttons located on the axle and remove the wheel (See
diagram).
ATTACHING THE TOW BAR – TRAILER END
1) The hitch arm is held in place by a spring pin and a lock pin. Depress the spring pin
and slide the tow bar into the receiver on the left side of the trailer as shown.
2) Once the spring pin locks in place in the hole in the bracket, locate the lock pin,
(tethered on the trailer frame), then insert the pin through the bracket and into the
hole in the tow bar. The pin should go completely through the tow bar and bracket.
3) Once the pin is through, rotate the spring clip up and over until it snaps into place
over the pin head.
4) Give the pin a tug to be sure it is secure.
WARNING
Ensure the tow bar is removed before using as a stroller.
ATTACHING THE TOP COVER
Position cover over the top of the trailer so that the roll-up window with bug mesh screen
is positioned over the front of the trailer.
1.
2.
