14
4. SPEAKER SETUP
4.1 DOWNMIX
Options: LT/RT- Left/Right mix mode
STEREO- Select this option if you do not have a 5.1 channel amplifier.
Radio Operation
TO PLAY THE RADIO
1. Slide the FUNCTION CONTROL to the RADIO position, the
POWER Indicator will light up.
2. Select the desired band with the BAND switch.
3. Tune to the desired station by rotating the TUNING control (move the
control back and forth until you get the strongest clearest sound).
4. The built-in AM antenna and external FM TELESCOPIC ANTENNA are
directional.
• When receiving an FM broadcast, fully extend the TELESCOPIC ANTENNA
and position for the best reception.
• For AM broadcasts, rotate the whole set until the best reception is heard.
5. Adjust the volume level to a comfortable listening level.
6. To turn off the radio, slide the FUNCTION switch to OFF position.
NOTES:
• If a particular FM (STEREO) station is weak, or you hear too much
background noise, try moving the position of the band selector switch to the
FM (MONO) position. This can often result in a much clearer reception.
• When the band selector switch is set to FM STEREO and a stereo broadcast
is being received, the FM STEREO indicator on the top of the unit will be lit.
STEREO HEADPHONE JACK
A stereo headphone jack has been provided on the back of the unit so that
you can listen to the unit without disturbing others. To use this jack, plug in
the headphones/earphones (not included) and adjust the VOLUME control to a
comfortable listening level.
NOTE:
When external headphones/earphones are connected, the sound to the
unit’s main speakers will be muted.
