FlowCam® 8000 Series Dynamic Imaging Particle Analyzer
29 of 39
2.
Select the
Run at end of analysis
checkbox for the Clean option.
3.
Click the
Number of cycles to perform
drop-down list and select the desired number of clean
cycles.
Note:
You cannot run the clean function without also running the rinse function.
4.
Select the
Run at end of analysis
checkbox for the Rinse option.
5.
Click the
Number of cycles to perform
drop-down list and select the desired number of rinse
cycles.
6.
Close the Pump Controller dialog to save your settings.
Powering Down the Analyzer
1.
Close the VisualSpreadsheet program.
2.
Push the power switch on the top right of the analyzer cover. The computer shuts down and the
monitor turns off automatically.
Note:
The FlowCam analyzer’s fluidics components continue to operate, along with the system’s
internal fans. Turning off the main power supply unit shuts down the entire system.
3.
Turn off the main power supply unit that the system components are plugged into.
