Dispose of extra liquid/chemical based on
manufacturer’s instructions. Rinse out any residual
solution in the spray tank with warm, soapy water.
Then spray fresh water through the sprayer for 3 to
5 minutes to completely clear the tank, pump, gun,
wand, and any used nozzles of chemicals.
Disconnect the hose from the spray gun and let
the hose hang down towards the ground in order to
drain the hose of any liquid.
Dry the sprayer tank and clear the nozzle of any
buildup.
Store the sprayer in a clean, dry, and shaded
location to protect it from extreme heat or frost.
For long-term storage, regular charging of the
battery is required to maximize battery life. Check
the battery level using the indicator lights every 4
weeks. Recharge the battery if it falls below 3 bars.
Do not allow the battery to fully discharge.
A)
Proper sprayer maintenance is crucial to ensure the life and performance of your sprayer.
Many spray materials can harden if left in the sprayer, causing clogs in the nozzle or hose.
Gasoline should never be used to clean out your sprayer.
B)
C)
D)
*
STEP 3.
AFTER YOU FINISH SPRAYING
Copyright © WESSOL, LLC
14
Содержание FZVACF-2.5
