C MONSOON 2.5
OPERATION GUIDE
FZVACF-2.5
© WESSOL, LLC 2022
5.
ASSEMBLY CONT.
PART A: ASSEMBLING YOUR NEW SPRAYER
5. Insert the sprayer handle
into the slots and adjust to
your desired height. It may
be easier to slide the knobs
onto the handle while you
are positioning it. Secure
the handle by tightening
the knobs back onto the
threads on the spray tank.
6. Place a hose storage bracket
(6) on the back of the spray
tank. Attach the bracket to
the tank using a phillips-head
screwdriver and the bolts.
Repeat for the other bracket.
7. Connect the male end of the
hose (8) with the female end
of the jumper hose attached
to the sprayer tank. Pull back
the collar on the female
GHT fitting, insert the hose,
and release the fitting.
8. Attach the spray gun (8) to
the female end of the hose
using the same method.
9. If
spraying
with
the
stainless-steel spray wand
(7), pull back on the collar of
the quick-connect fitting on
the spray gun and insert the
male wand quick-connect.
Push the collar back into its
original position. Nozzles can
be placed on the spray wand
using the same process
9. Wrap the hose around the
storage brackets, snap the
spray wand into the wand
holster and place any unused
nozzles into the storage
slots until ready to spray.
6.
7.
8.
9.
9
