|
4
QS204260 Rev B
WIRING PODVIEW
®
PodView
®
and EchoPod
®
require a 12 to 28 VDC power supply to operate. The maximum cable distance
between PodView
®
and EchoPod
®
is 15’ (4.5m). Follow the below steps to wire PodView
®
with EchoPod
®
.
EchoPod
®
PodView
®
Note:
Wiring is identical for all EchoPod
®
series. Only use the Red, Black, Green and White wires.
1.
Connect the Red and Black wires of both PodView
®
and EchoPod
®
to the 12-28 VDC power supply.
2.
Connect the Green and White wires of PodView
®
to the corresponding Green and White wires of
EchoPod
®
.
Note
: Isolate the Green and White wires from active power to prevent a short of the
configuration circuit.
Electrical Connections, Usage and Safety
•
Where personal safety or significant property damage can occur due to a spill, the installation must
have a redundant backup safety system.
•
Wiring should always be completed by a licensed electrician.
•
The indicator supply voltage should never exceed 28 VDC.
•
Protect the indicator from electrical spikes by isolating the power.
•
Design a fail-safe system for possible indicator and/or power failure.
•
Never use the indicator in environments classified as hazardous.
