manualshive.com logo in svg

FlowLine EchoSwitch II LU77 Series, Руководство пользователя

Поделиться
Скачать
FlowLine EchoSwitch II LU77 Series Скачать руководство пользователя страница 27

 

09 JUL 08 

EchoSwitch II 

27 of 33 

Rev A 

MN300650  

Installation 

Warning - Flowline Ultrasonic transmitters have been optimized for use in non-metallic fittings.  
For best performance, avoid the use of metallic fittings.  Install the appropriate installation 
fitting.  Make sure that the fitting and transmitter threads are not damaged or worn.  Install the 
transmitter with the included Viton mounting gasket.  Hand-tighten the transmitter within the 
fitting.  Perform an installed leak test under normal process conditions prior to system start up. 
 

Do not install at 

angle relative to the 

liquid. 

Do not install within 

3” of tank sidewall. 

Do not install with 

objects in the beam. 

Do not install in 

applications with 

vacuum. 

 

 
Fitting Selection:  Check the part number to determine the required fitting mount size and thread 
type.  EchoSwitch II is commonly installed in tank adapters, flanges, brackets or standpipes.  
Note: Always include the gasket when installing the EchoSwitch II.  
 

1.

 

Tank Adapter:

  Select a tank adapter fitting with minimal height so as to ensure that the 

installed transducer will not be substantially elevated into the fitting such as the Hayward 
2” Tank Adapter (socket by thread).  For the LU77-5005 version s, add a Reducer 
Bushing such as the Spears 2” x 1”, thread x thread, Reducer Bushing (series 839-249, 
Flowline p/n LM52-1001).  Avoid tank adapter (thread x thread) styles and/or pipe stops 
forward of the installed transducer. 

 

2” Tank Adapter 

Socket x Thread 

Tank Adapter 

w/ 2”x1” Reducer Bushing 

Tank Adapter 

Thread x Thread 

 

Do not use thread x thread 

 

Содержание EchoSwitch II LU77 Series


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды