|
6
QS310140 Rev A2
STEP 7 - WRITE TO UNIT
This WebCal
®
* operation uploads the configuration into the sensor, provides a custom wiring diagram specific
to the signal output and/or relay configuration, and saves the configuration file to your hard drive.
* For complete information on the WebCal
®
software, please refer to the WebCal
®
manual located at
flowline.com/webcal-software.
Before configuration can be completed:
You must click the
Write to Unit
button to save the settings to the unit.
Then, click
Wiring Diagram
for a hard copy of the sensor’s settings.
Finally, enter the file name under which you wish to save the configuration file and click
Save Config
File
.
Configuration is now complete
.
Disconnect the USB
®
Fob before continuing to the next step: Mounting the EchoPod
®
.
