|
4
QS310140 Rev A2
STEP 3 - MEASURE THE TANK
Measuring the tank is one of the most important aspects
in configuring the sensor. When measuring the tank,
take into account the location of the sensor with respect
to fittings, risers, dome tops and bottoms, and identify
where the measurements are taken from the sensor.
The HEIGHT and FILL-H settings determine the 4-
20mA span and are always measured from the bottom
of the tank up.
STEP 4 - SENSOR CONFIGURATION
Configures the Loop Fail-Safe, Output at Empty and Startup Condition for the sensor.
