27 AUG 08
PRELIMINARY MANUAL
45 of 57
Rev 1_3
Commander LI90 Series
o
Horizontal Tanks – Select among Flat Ends or Round Ends.
Length
Diameter
Flat Ends
Round Ends
1. Sensor Height
2. Tank Length
3. Tank Diameter
4. End Cap Length
•
Sensor Height – This is the distance from the bottom of the tank to the
bottom of the sensor
•
Tank Length – This is a length of the tank.
•
Tank Diameter – This is diameter of the tank.
•
End Cap Length – This is the distance for one of the end caps. You do
not need to configure this setting for the Flat End Tank.
•
Use the Next soft key to advance to the next setting
•
Use the Back soft key to return to the previous setting
