Flower House StarterHouse, Руководство пользователя

Страница: 1 / 3

Page 1
Step 1:
Remove
your StarterHouse™
from the pack. The
StarterHouse™ is
spring-loaded.
Step 2:
Allow your
StarterHouse™ to
spring open as in "B"
above.
Step 3:
Unfold your
StarterHouse™ into 2
panels totaling 8 ft. long.
Step 4:
Open the
bottom of your
StarterHouse™ so it
stands on its own. As
shown in "D & E"
Step 5:
Secure your
StarterHouse™ using the
supplied stakes. Insert the
stakes into the stake holes
of the skirt at 45
° angles as
shown in "F".
Step 6:
You must secure your
StarterHouse using the high-wind tie-
downs. Insert one end of the rope
through the D-ring at the top peak, then
through the anchor. Knot the rope
around a stake and insert in the ground
at a 45
° angle. Keep as much tension
on the rope as possible
Step 7:
The vents of the
StarterHouse™ can be secured
open for ventilation. To secure
vents, first unzip them. Roll them
up and then use the straps to hold
the vents in place as shown in "H".
Self-erecting portable greenhouses Set up Instructions