Flower House SpringHouse, Настройка

Страница: 3 / 5

Self-erecting portable greenhouses Set up Instructions
Page 2
Step 9:
Begin with the X-shaped fiber pole. (See
"I"). Insert the capped ends into the pockets above
the doorways. Then completely assemble the fiber
pole. (See "J").
Step 10:
Beginning with
one
of the L-shaped fiber poles,
insert the capped end into the pocket in the center near the
floor. (See "K"). Insert the uncapped end into the X-shaped
piece. "See "L"). While assembling the L-shaped pole, keep
it to one side. This will relieve some tension and allow for
easier assembly. (See "Ka").
Step 11:
Repeat Step 10 with the second L-shaped fiber
pole. When the poles are completely assembled, move them
to the center of the wall, and tie them to hold them in one
place. See photo M.
Step 12:
The doorways of your
SpringHouse™ can be secured open for
ventilation. First unzip the top portion of the
outer door. Roll it down and secure it with
the straps.
Step 13:
The screens can also be
secured open. Unzip both the doorway
and screen. Roll them together long
ways. Secure with the straps.