Self-erecting portable greenhouses
Take Down Instructions
Page 1
Step 1:
Begin first by
removing all of the stakes. It
may be easier for you to use
one take to remove another.
Step 2:
Be sure your doors and
screens are zipped closed, then place
your PlantHouse™ on it's side and
remove the fiber pole from the ceiling.
Step 3:
Push on the center
steel band. The two top
bands must be forced to lay
uniformly on top of the two
bottom bands so your
PlantHouse™ will fold into
two panels.
Step 4:
Folding one panel on top of the other
panel your PlantHouse™ should be one flat
panel. Shown in Photos 4 & 5.
Step 5:
Choosing the top corner, fold your
PlantHouse™ in half. You will feel the tension of
the spring steel. Continue folding under while you
bring the left side up and over. Your
PlantHouse™ should resemble a taco. See
photos 6 & 7.
Step 6:
Continue folding
your PlantHouse™.
