7
7.
CONNECTION OF ELECTRICAL INSTALALTION
•
Remove screws from down and above as in the picture PIC. 7.1.
•
Use imbus 3.0mm key to remove the screws.
•
Depending on the length of the device, the number of screws varies (see the table).
Model
Number of bolts from above
Number of bolts from below
ELIS AX 100
1
3
ELIS AX 150
2
4
ELIS AX 200
2
5
ELIS AX 250
3
6
•
To remove the cover, tilt it (1) and slide it out of the catches (2) as shown in the graphic PIC. 7.2.
1
2
2
PIC. 7.1 SCREW POSITIONS.
PIC. 7.2 REMOVING THE COVER.
