Flow Fitness Avenue TM2000i, Руководство пользователя

Страница: 70 / 76

70 - Manual Avenue TM2000i Treadmill
5. General information
Problem:
The display of the treadmill is not switching on.
Solution:
-Check if the plug is connected to a grounded outlet
-Check if the switch near the adapter cable is set to ON or I.
-Check if the fuse near the switch . If the fuse is broken contact your reseller.
Problem:
Segments of the screen don’t light up.
Solution:
The screen LED are damaged, contact your reseller.
Problem:
The screen shows “- -”.
Solution:
The safety key is not placed (correctly). Place the safety key into the designated
area of the treadmill.
Problem:
The screen shows error code E1
Solution:
The speed sensor transmits a abnormal value. Please follow these steps:
1.
Remove power from the treadmill (unplug the treadmill). Wait 10 seconds before
powering the treadmill again.
2. Press START and check the following:
a. Does the belt start to move?
b. If the belt is moving, is the screen still showing the E1 error?
3. If the treadmill is working normal again, lubricate the belt and centre / tension it
as described in chapter 4.4 of this manual. When the belt is still not moving or the
E1 error is still visible contact your reseller.
5.3 Troubleshooting