FLOTER AIRBOY nano4, Руководство по эксплуатации

Страница: 12 / 24

OPERATING INSTRUCTIONS
11
4. Adjustment working time
Working time presetting: Long press the “STOP” button to enter the run time preset mode
(00:01 to 02:00), the temperature “+” and “-” buttons refer to hours; the air volume “+”
and “-” buttons refer to minutes. Please press the “STOP” button to save and exit the data
1. Before presetting run time, please estimate the rest length of film to avoid the
idle times and cause the machine damaging.
2. The working time only be set up in advance and cannot be changed while the
machine in working mode. But the air volume, speed and temperature can be
changed anytime.
3. Users can adjust the parameter according to different required; it will save the
used parameter with each power off
Example: Full roll AirWave Standard 9.7.1 (350m) lasts:
V4 (10m/min) - 35min
V3 (8m/min) - 44min
V2 (6m/min) - 59min
V1 (4m/min) - 88min