California Proposition 65 Warning
This product and related accessories
contain chemicals known to the State of
California to cause cancer, birth defects or
other reproductive harm.
DESCRIPTION
This Submersible Sump Pump is designed
for home sumps. The unit is equipped with
a 3-prong grounding-type power cord. The
shaded-pole motor is oil filled and sealed
for cooler running. The upper sleeve/lower
ball bearings on the motor shaft never need
lubrication. Automatic reset thermal protection
is provided.
NOTICE: This unit is not designed as a
waterfall or fountain pump, or for applications
involving salt water or brine! Use with
waterfalls, fountains, salt water or brine will
void warranty.
Do not use where water recirculates or as a
swimming pool drainer.
NOTICE: Read this Owner’s Manual for
installation, operation, and safety information.
Keep for future use.
SPECIFICATIONS
Power supply required.................. 115V, 60 HZ.
Liquid Temp. Range ... 32°F to 130°F (0°-54°C)
Individual Branch Circuit Required (min.)...... 15
Amps
Discharge: ....................................... 1-1/2” NPT
NOTICE: Do not reduce size of discharge pipe
or hose below 1-1/4” diameter. If discharge
is too small, pump will overheat and fail
prematurely.
This pump is designed for use in a residential
sump only. Pump water only with this pump.
PERFORMANCE
MOTOR & CORD SPECIFICATIONS
GENERAL SAFETY INFORMATION
1. Know the pump application, limitations, and
potential hazards.
2. Do not use in water with fish present.
If any oil leaks out of the motor it can kill
fish.
3. Disconnect power before servicing.
4. Release all pressure within system before
servicing any component.
5. Drain all water from system before
servicing.
6. Secure discharge line before starting pump.
An unsecured discharge line will whip,
possibly causing personal injury and/or
property damage.
7. Check hoses for weak or worn condition
before each use, making certain that all
connections are secure.
8. Periodically inspect sump, pump and
system components. Keep free of debris
and foreign objects. Perform routine
maintenance as required.
9. Provide means of pressure relief for pumps
whose discharge line can be shut-off or
obstructed.
10. Personal Safety:
a. Wear safety glasses at all times when
working with pumps.
b. Keep work area clean, uncluttered and
properly lighted – replace all unused
tools and equipment.
c. Keep visitors at a safe distance from work
area.
d. Make workshop child-proof – with
padlocks, master switches, and by
removing starter keys.
11. When wiring an electrically driven pump,
follow all electrical and safety codes that
apply.
For parts or assistance, call Flotec Customer Service at
1-800-365-6832
Specifications and Safety
2
Motor
HP
Full
Load
Amps
Individual Branch
Circuit Required
(Amps)
Cord
Length
1/3
9.8
15
10’ (3
m)
GPH (LPH) At Total Feet (m) of Lift
5
(1.5 m)
10
(3 m)
15
(4.6 m)
20
(6.1 m)
No flow
at height
shown
below
Capacity–Gallons(L)/Hour
2,880
(10,902)
2,400
(9,085)
1,740
(6,587)
900
(3,407)
24 Ft.
(7.3 m)
Содержание FPSC3350A
Страница 20: ......
