FP-1051A
7" STRAIGHT-HANDLE NEEDLE SCALER
7" STRAIGHT-HANDLE NEEDLE SCALER
Ref. Description Part #
1
Anvil
109010
2
Barrel w/112020-1
425665
3
Piston
112020-1
4
Retaining pin
111230
7
Valve Block Assembly
425570-1
8
Valve block stop
121030
9
Lock nut
108160
10
Spring
118020
11
O-ring
115120
12
Trigger valve stem
120230
13
O-ring (2)
115160
14
Trigger valve body
120120
15
Retaining pin
111220
16
Safety lever
120330P
17
1/4” regulator
5711
18
Handle Assy
262371
19
Needle scaler housing
109060
20
Cap screw (2)
109070
21
Spring
109050
22
Needle holder
109030
23
Buffer
109040
24
Set of 19 needles
109020
Scaler attachment
109080
Complete
Specifications
Speed .......................................................................................................................... 3,700 BPM
Weight ........................................................................................................................... 4 5/8 lbs.
Overall length .................................................................................................................. 16-1/2”
Average air consumption .................................................................................................4 CFM
Air inlet .......................................................................................................................... 1/4" NPT
Recommended hose size .............................................................................................. 3/8" I.D.
Maximum air pressure ....................................................................................................... 60 PSI
Tool Operation and Maintenance
'DLO\
, before putting tool into operation,
disconnect air hose and pour 1/4 oz. of
air tool oil into the air inlet.
%OR
w out air line to clear it of accumu-
lated dirt and moisture. Connect tool and
operate momentarily to allow oil to be
carried through tool.
+
ose runs longer than 8 feet should be
connected to a 1/2” ID hose to provide
sufficient volume for proper performance.
We recommend oil made exclusively for
air tools or equivalents which include
moisture absorbants, rust inhibitors,
metal wetting agents and an EP (extreme
pressure) additive.
Florida Pneumatic’s Limited Warranty
Florida Pneumatic warrants their tools to be free from defects in material and work-
manship for tw o years from the date of purchase. This warranty does not apply to tools
which have been abused, misused, modified or repaired by someone other than
Florida Pneumatic or their authorized service centers. If a Florida Pneumatic tool
proves defective in material or workmanship within two years after purchase, return it to
any authorized service center or Florida Pneumatic freight prepaid. Please enclose
your name, address and adequate proof of purchase and a short description of the
defect. Florida Pneumatic will, at their option, repair or replace defective tools, free of
charge. Repairs or replacements are warranted as described above for the remainder
of the original warranty period. Florida Pneumatic sole liability and your exclusive
remedy under this warranty is limited to repair or replacement of the defective tool.
There are no other warranties expressed or implied and Florida Pneumatic shall not
be liable for incidental, consequential or special damages, or any other damages,
costs or expense of repair or replacement as described above.
7
4
