43
MT
GB
Problem
Possible cause
Remedy
Motor will not
start
No mains power
supply
Check the socket, cable, lead and
plug for damage, and if necessary,
have any damage repaired by
qualified repair personnel.
Overload protection tripped
Wait until the motor has cooled down,
then press the Reset button and restart
the unit
Lid of housing not closed
properly
Tightly screw in the housing interlock
Garden waste is
not drawn in
Shredding material is too
soft
Use the pusher or add dry twigs/
branches
Unit blocked
See section „Removing blockages“
Shredding material in
discharge duct
Remove shredding material from
discharge duct
Unit won‘t shred
properly
Blades are blunt
Check and turn, sharpen or replace
blades as necessary (see section
„Sharpening, turning, replacing the
blades“)
Troubleshooting
Содержание FMH 2400 A1
Страница 3: ...A 1 2 7 5 3 8 6 9 4 10...
Страница 4: ...5 11 12 13 14 B C 6 6 D 15 17 18 8 19 16 6 1 1...