FLORABEST FLB 3000 A1, Перевод оригинального руководства по эксплуатации

Страница: 15 / 89

14
GB
position, otherwise have the machine inspected
by an authorised customer service firm.
• The shredder wheel is blocked: Check
whether an object has been sucked in that is
too large; a piece of wood, cardboard or other
object has become jammed between the impel-
ler and shredder chamber. If the shredder wheel
remains blocked have the machine inspected by
an authorised customer service firm.
• If the machine vibrates, please immediately
stop using it. Have the machine inspected by
an authorised customer service firm.
Waste disposal and environmental
protection
If your device should become useless somewhere in
the future or you do not need it any longer, do not
dispose of the device together with your domestic
refuse, but dispose of it in an environmentally friendly
manner. Please dispose of the device itself at an ac-
cording collecting/recycling point. By doing so, plastic
and metal parts can be separated and recycled.
Information concerning the disposal of materials and
devices are available from your local administration.
EC Declaration of Conformity
We, ikra GmbH, Schlesier Straße 36, D-64839
Münster / Altheim , declare under our sole re-
sponsibility that the product Electric Leaf Blower
FLB 3000 A1 , to which this declaration relates
correspond to the relevant basic safety and health
requirements of Directives
2006/42/EC (Machi-
nery Directive), 2004/108/EC (EMC-Guideline),
2011/65/EU (RoHS directive) and 2000/14/
EC (Noise directive) incl. modifications. For the
relevant implementation of the safety and health
requirements mentioned in the Directives, the fol-
lowing standards and/or technical specification(s)
have been respected:
EN 60335-1/A15:2011; IEC 60335-2-100:2002;
EN 62233:2008, EN 55014-1/A2:2011; EN
55014-2/A2:2008; EN 61000-3-2/A2:2009; EN
61000-3-11:2000
measured acoustic capacity level
101,6 dB(A)
guaranteed acoustic capacity level
104,0 dB (A)
Conformity assessment method to annexe V /
Directive 2000/14/EC
The year of manufacture is printed on the nameplate
and can be additionally retrieved via the consecutive
serial number.
Serial number:
3158200050319-3158200163082
Münster, 19.08.2013
Gerhard Knorr, Technical Management Ikra GmbH
Maintenance of technical documentation: Gerhard
Knorr, Kärcherstraße 57, DE-64839 Münster
Guarantee
Dear Customer,
This device comes with a 3 year warranty from the
date of purchase. In the event of faults with this
product you have legals rights with respect to the
seller of the product. These rights are not affected
by our guarantee which follows hereafter.
Warranty conditions
The warranty period begins with the purchase date.
Please keep the original sales receipt safely. This
document is required as proof of purchase.
If a material or manufacturing fault should occur
with this product within three years of the date of
purchase, we will either repair or replace the product
at no charge to you, at our discretion. This guarantee
implies that the defective device and the sales receipt
(till slip) will be submitted to us within the three year
period along with a brief written description of where
the fault is and when it occurred.
If the defect is covered by our guarantee then you
will receive a repaired product or a new product
back. There will no new guarantee period with the
repair or replacement of the product.
Guarantee period and legal claims for defects
The guarantee period is not extended by the
execution of the guarantee. This also applies to
replaced and repaired parts. Any damage or faults
present at the time of purchase must be immediately
reported as soon as the device is unpacked. After the
guarantee period has expired any repairs required
will be chargeable.
Scope of the guarantee
The device has been carefully manufactured in
accordance with strict quality guidelines and has