FLORABEST BL FBS 25 A1, Перевод оригинальной инструкции

Страница: 65 / 104

6 5
M T
G B
General Storage Instructions
• Clean the equipment and accessories
carefully before storage.
• Keep the equipment in a dry and dust-
proof place out of reach of children.
• Do not wrap the equipment in plastic
bags, as damp and mould may form.
• Do not store the equipment on the pro-
tective cover; ideally hang it from the
top handle.
Storage During Working
Breaks
Non-observance of the storage
instructions can cause starting
problems or permanent damage as
a result of fuel residues in the carbu -
rettor.
In case of working breaks of less
than 3 months:
1. Drain the fuel tank (7) in a well-ventilat -
ed place.
2. Start the engine and allow it to tick
over until the engine stops and the car-
burettor is free of fuel.
3. Allow the engine to cool (approx. 5
minutes).
Maintenance Intervals
Regularly carry out the maintenance work listed in the “maintenance intervals” table.
Regular maintenance prolongs the life of the equipment. It also gives optimum cutting per -
formance and avoids accidents.
Table “Maintenance Intervals”
Machine Part Action
Before
Each Use
Operating
Hours
10 20
Screws, nuts, bolts Check, tighten

Air filter Clean or replace

Fuel filter Replace

Spark plug Clean/adjust/replace

Fuel hoses Check, replace if necessary

Complete machine Check, clean if necessary

Operating handle Check for function

Cutting head Check correct installation

Coupling
Check that the device is sta-
tionary when idling

Storage